Trophy
Tips for the trophy generator
For mirror or clear acrylic figures, a clearance of 0.05 mm gives a tight push fit; plywood likes 0.1 to 0.15 mm.
- For mirror or clear acrylic figures, a clearance of 0.05 mm gives a tight push fit; plywood likes 0.1 to 0.15 mm.
- A club or school logo makes a fine emblem: choose Motif, then Your picture; its outline is cut and its details are engraved or scored.
- Three tiers with a 5 to 8 mm step look like a turned plinth.
- Engrave the base text in front of the figure so it reads from the same side.
- Keep the figure no taller than about three times the base's depth so it does not tip.