Puzzle
Tips for the puzzle generator
3 mm plywood or MDF works well; keep pieces at least 15 mm across and tab necks wider than the material is thick.
- 3 mm plywood or MDF works well; keep pieces at least 15 mm across and tab necks wider than the material is thick.
- Engrave the picture first and cut without moving the sheet, so the picture lines up with the pieces.
- For a photo, raise the contrast before you load it; engraving flattens mid-greys.
- Change the layout number until the edge pieces look right, especially on a heart or circle.
- Small children need large pieces: use the Kids style with 4 to 12 pieces, and a tray to keep them together.